Printing Silicon Pads

Pad Printing Rubber Pads or Tampons

Tampon rubber receives the motif from the cliche, transfers the ink film to the substrate. Printing pads or Tampon Pads are made of silicone rubber and produced as stamps in a wide array of shapes, hardnesses and qualities. We have arround 400 different shapes and sizes. Our Silicon Pads are available in three different Shore A Hardness namely soft, medium and hard.

Printing Silicon Padsimage shadow Printing Silicon Pads

Why Buy our Pad Printing Silicon Pads???

Imported Rubber

1

We do not compromise on raw materials therefore our Silicon Rubber Raw Materials are imported from top German Silicon Rubber manufacturers like Wacker and Dow Corning. We do not use Cheap Chinese Products

Variety of Shapes

2

We have arround 400 odd different shapes and sizes of Tampon pads out of which 3 categories Round, Square and Rooftop(long) shapes are cataloged. they can be downloaded in here PDF format.

Shore A Hardness

3

Hardness is required according to the substrate. harder the pad more accurate will be the printing but at certain times for delicate substrate soft pad is required. we can vary our pad hardness. We can give you from 5 Shore A to 25 Shore A

Square Shapes

Square and Rectangular Shape Pads are included in this category. We have around 135 different shapes in this category.

  • Standard Pads are available almost immediately.
  • Long service life even in continous operation.
  • High mechanical strength.
  • High flexibility.
  • Resistant to aggressive inks.
  • Desired Shore A hardness available.

Printing Silicon Padsimage shadow Printing Silicon Pads
View Catalog Online
Download Square Catalog

Round Shapes

Round or Circular Shape Pads are included in this category. We have around 108 different shapes in this category.

  • Standard Pads are available almost immediately.
  • Long service life even in continous operation.
  • High mechanical strength.
  • High flexibility.
  • Resistant to aggressive inks.
  • Desired Shore A hardness available.

Printing Silicon Padsimage shadow Printing Silicon Pads
View Catalog Online
Download Round Catalog

Long Shapes

Longitudinal Shape Pads are included in this category. We have around 82 different shapes in this category.

  • Standard Pads are available almost immediately.
  • Long service life even in continous operation.
  • High mechanical strength.
  • High flexibility.
  • Resistant to aggressive inks.
  • Desired Shore A hardness available.

Printing Silicon Padsimage shadow Printing Silicon Pads
View Catalog Online
Download Long Catalog

Special Shapes

Saddle, and Special Purpose Pads are included in this category. We have around 200 different shapes in this category.

  • Standard Pads are available almost immediately.
  • Long service life even in continous operation.
  • High mechanical strength.
  • High flexibility.
  • Resistant to aggressive inks.
  • Desired Shore A hardness available.

Printing Silicon Padsimage shadow Printing Silicon Pads
This Category is not yet Cataloged

In order to obtain best printing results and to maintain properly your pads, the following rules should be observed:

When not in use, pads must be clean and as free of dust as possible and stored on their base. When storing pads for longer periods it is recommanded to rub the pads with Talcum Powder.

Before using a pad for the first time on a product it is recommanded to print a few times on paper. This “activates” the pad. Should the pad still not absorb enough ink from the cliché, rub it carefully with a cleaning cloth that has been soaked in thinner. Once again print on paper. A part from that instance, pads should be not wiped or rubbed with solvantes as this may affect the life span oft the material.

Never rub a dry pad and never use your fingers or the palm of your hand. The so-called “eraser-effect” may cause irreparable damages on your pad. Use normal adhesive tape to remove any soiling on the pad.

During lengthy periods of operation, it is advisable to exchange pads regularly. Under extreme stress it is possible that plastic deformation occurs. This however does not affect the pad. These deformations are reversible and will recede within 24 hours of rest. Store the pad as described in point 1.